CNC Gantry Drilling and Tapping Center
Hōʻike huahana
He moena ākea ākea kēia CNC Gantry drilling-tapping center e paʻa i ka mea hana.ʻO ka hoʻolālā kolamu Gantry, ka māmā 3D dynamic finite element analysis a me ka optimization o ke kino mīkini e pale i ke kino mīkini mai ka deforming, a laila e hoʻonui ai i ke ola lawelawe o ka mīkini mea hana.
Hana ʻia nā mea hoʻoheheʻe o CNC drilling-tapping center i nā mea kiʻekiʻe kiʻekiʻe a ʻae ʻia ma lalo o ka mālama ʻana i ka wā kahiko, i loaʻa iā mākou kahi hoʻolālā paʻa a me ka rigidity kiʻekiʻe.
Hoʻohana ke alakaʻi ʻekolu-axis i ke alakaʻi laina laina kiʻekiʻe e hōʻoia i ka pololei o ka hoʻonohonoho ʻana o ka mīkini i ka wikiwiki kiʻekiʻe.
Hoʻohana ka hoʻoili ʻekolu-axis i ka wili pōpō kiʻekiʻe a me ka hoʻokele pololei o nā kaʻa servo.
Hoʻohana ka shaft nui i ka hoʻolālā ʻāpana shaft nui, i loaʻa ka wikiwiki kiʻekiʻe a me ka pololei kiʻekiʻe.
Hiki ke hoʻololi i nā mea hana maʻamau 12T type hat type magazine magazine.
ʻO ka puka makani e kōkua i ka mea hana e nānā ana i ka hana, he palekana palekana no nā mea hana.
He ʻōnaehana mana akamai kēia kikowaena hoʻoheheʻe ʻana, hiki i ka mea hoʻohana ke hoʻonohonoho i nā ʻāpana he nui e like me nā mea hana like ʻole, a ma kēia ʻōnaehana hoʻokele, he nui nā hana e koho ai.Ma ke kōkua o ka ʻōnaehana hoʻokele, hiki i kēia mīkini ke hoʻokō maʻalahi, hiki i nā mea hana ke hana i nā mīkini.Hiki i kēia mīkini ke hana pū me nā robots e hoʻokō i hoʻokahi laina hana maʻalahi.
ʻĀpana
| Nā mea | F-BYNC870 | F-BYNC650 | F-BYNC6060 |
| XYZ huakaʻi (mm) | 700*800*350 | 600*500*300 | 600*600*300 |
| Ka mamao ma waena o ka ihu spindle a me ka papa hana (mm) | 50-500 | 50-430 | 250-550 |
| Laulā laula (mm) | 750 | 740 | 670 |
| papa hana (mm) | 800*690 | 600*500 | 640*700 |
| Spindle | BT40 | BT30 | BT30 |
| Hoʻouka ʻana i ka papa hana (KG) | 400 | 300 | 300 |
| ʻO ke kani uila | 8mm | 5mm | 5mm |
| Ka helu o nā T-slots | 5 | 5 | 4 |
| ʻO ka mīkini ʻōniʻoniʻo (KW) | 5.5 | 3.7 | 3.7 |
| ʻEkolu axis motor (XYZ) | 6/10NM | 4/6NM | 4/6NM |
| ʻEkolu ala alakaʻi axis (XYZ) (mm) | 35*35*35 | 30*30*30 | 30 |
| ʻEkolu axis screw rod (XYZ)(mm) | 32 | 32 | 25 |
| Ana(mm) | 2.43*2.35*2.56 | 2.1*2*2.35 | 1.96*2.01*2.2 |
| Kaumaha | 5T | 3.5T | 2.5T |
| Mekala ʻano pāpale ʻohe | 12T | 12T | 8T |
| ʻōnaehana CNC | KND (hoʻopilikino ʻia) | ||
