CNC Gantry Drilling and Tapping Center
Mafotokozedwe Akatundu
Malo obowola a CNC Gantry awa ali ndi bedi lalikulu kwambiri logwirira ntchito.Kapangidwe ka gawo la Gantry, kuwunikira kocheperako kwa 3D ndi kukhathamiritsa kwa makina amakina kumapangitsa kuti makinawo asapunduke, potero amawonjezera moyo wautumiki wa chida cha makina.
The castings wa CNC pobowola-pogogoda likulu amapangidwa ndi zipangizo apamwamba ndi kuvomerezedwa pansi ukalamba mankhwala, kuti tipeze khola lonse dongosolo ndi mkulu kuuma.
Kalozera wa ma axis atatu amatengera kalozera wolondola kwambiri kuti atsimikizire kulondola kwa makinawo pa liwiro lalikulu.
Kutumiza kwa ma axis atatu kumatengera wononga mpira wolondola kwambiri komanso kuyendetsa molunjika kwa ma servo motors.
Shaft yayikulu imatenga gawo lalikulu la shaft unit, lomwe limakhala ndi liwiro lalikulu komanso kulondola kwambiri.
Magazini yamtundu wa chida cha 12T chipewa imatha kuzindikira kusintha kwachida.
Mawindo amathandizira wogwiritsa ntchito kuyang'anira kukonza, ndi chitetezo cha chitetezo kwa ogwira ntchito.
Malo obowola awa ali ndi dongosolo lowongolera mwanzeru, wogwiritsa ntchito amatha kuyika magawo ambiri ngati zida zosiyanasiyana, ndipo mudongosolo lino, pali ntchito zambiri zoti musankhe.Mothandizidwa ndi dongosolo lowongolera, makinawa amakwaniritsa zosintha zokha, oyendetsa amatha kugwiritsa ntchito makina angapo.Komanso makinawa amatha kugwirizana ndi maloboti kuti akwaniritse mzere umodzi wopangira zokha.
Parameter
| Zinthu | F-BYNC870 | F-BYNC650 | F-BYNC6060 |
| XYZ maulendo (mm) | 700*800*350 | 600*500*300 | 600*600*300 |
| Mtunda pakati pa mphuno ya spindle ndi tebulo logwirira ntchito (mm) | 50-500 | 50-430 | 250-550 |
| Kutalika kwa Gantry (mm) | 750 | 740 | 670 |
| Gome la ntchito (mm) | 800*690 | 600*500 | 640 * 700 |
| Spindle | Mtengo wa BT40 | Mtengo wa BT30 | Mtengo wa BT30 |
| Kuyika tebulo logwirira ntchito (KG) | 400 | 300 | 300 |
| Chiwombankhanga | 8 mm | 5 mm | 5 mm |
| Nambala ya T-slots | 5 | 5 | 4 |
| Spindle motor (KW) | 5.5 | 3.7 | 3.7 |
| Magalimoto atatu olamulira (XYZ) | 6/10NM | 4/6 NM | 4/6 NM |
| Njanji zitatu zoyendera ma axis (XYZ) (mm) | 35 * 35 * 35 | 30*30*30 | 30 |
| Ndodo zitatu za axis screw (XYZ)(mm) | 32 | 32 | 25 |
| Kuyeza (mm) | 2.43 * 2.35 * 2.56 | 2.1*2*2.35 | 1.96*2.01*2.2 |
| Kulemera | 5T | 3.5T | 2.5T |
| Magazini ya Bamboo Hat Type | 12T | 12T | 8T |
| CNC ndondomeko | KND (mwamakonda) | ||
