CNC Gantry Drilling and Tapping Center
Sharaxaada Alaabta
Xaruntan tuubada qodista ee CNC Gantry waxay leedahay sariir aad u ballaaran si ay u qabato qalabka shaqada.Naqshadeynta tiirarka Gantry, 3D iftiin firfircoon falanqaynta walxaha xaddidan iyo hagaajinta jidhka mishiinku waxay ka hortagtaa jirka mashiinka inuu waxyeeleeyo, taas oo kordhinaysa nolosha adeegga aaladda.
Tuubbooyinka CNC ee xarunta tuubada qodista waxay ka samaysan yihiin qalab tayo sare leh waxaana la aqbalayaa daawaynta gabowga, si aan u helno qaab dhismeed guud oo deggan iyo qallafsanaan sare.
Hagaha saddexda dhidibka ah wuxuu qaataa hage toosan oo sax ah si loo hubiyo meelaynta saxnaanta mashiinka xawaaraha sare.
Gudbinta saddexda dhidibka ah waxay qabataa kubad saxan sare leh iyo wadista tooska ah ee matoorada servo.
Usha ugu weyni waxay qabataa qaab dhismeedka cutubka ugu weyn, si ay u leeyihiin xawaare sare iyo saxsanaan sare.
Majaladda qalabka koofiyadaha caadiga ah ee 12T waxay xaqiijin kartaa isbeddelka qalabka.
Daaqada waxay caawisaa hawlwadeenka daawashada habaynta, waa ilaalinta badbaadada hawlwadeenada.
Xaruntan qodista-tubintu waxay leedahay nidaam kontorool oo caqli-gal ah, hawl-wadeenku wuxuu dejin karaa cabbirro badan oo kala duwan, iyo nidaamka xakamaynta, waxaa jira hawlo badan oo la doorto.Caawinta nidaamka xakamaynta, mashiinkani wuxuu ku guulaystaa farsamaynta otomaatiga ah, hawl-wadeenadu waxay ku shaqeyn karaan mashiinno dhowr ah.Sidoo kale mishiinkani wuxuu la shaqayn karaa robots si loo gaaro hal khad wax soo saar oo toos ah.
Halbeegga
| Walxaha | F-BYNC870 | F-BYNC650 | F-BYNC6060 |
| Safarrada XYZ (mm) | 700*800*350 | 600*500*300 | 600*600*300 |
| Fogaanta u dhaxaysa sanka dunta iyo miiska shaqada (mm) | 50-500 | 50-430 | 250-550 |
| Ballaca gantiriga (mm) | 750 | 740 | 670 |
| Miiska shaqada (mm) | 800*690 | 600*500 | 640*700 |
| Spinal | BT40 | BT30 | BT30 |
| Soo dejinta miiska shaqada (KG) | 400 | 300 | 300 |
| Garoomada isku dhufashada | 8mm | 5mm | 5mm |
| Lambarada T-slots | 5 | 5 | 4 |
| Spindle Motor (KW) | 5.5 | 3.7 | 3.7 |
| Saddex dhidib motor (XYZ) | 6/10NM | 4/6NM | 4/6NM |
| Saddex xadiidka hagaha (XYZ) (mm) | 35*35*35 | 30*30*30 | 30 |
| Saddex dhidib usheeda dhexe (XYZ) (mm) | 32 | 32 | 25 |
| Cabbir (mm) | 2.43*2.35*2.56 | 2.1*2*2.35 | 1.96*2.01*2.2 |
| Miisaanka | 5T | 3.5T | 2.5T |
| Joornaalka nooca koofiyadda Bamboo | 12T | 12T | 8T |
| nidaamka CNC | KND (la habeeyey) | ||
