WUXI FOREST TRADE CO., LTD IS BUILT IN 2018 YEAR

I-CNC Gantry Drilling and Tapping Center

Incazelo emfushane:

XYZ ukuhamba: 700*800*350~600*600*300mm
Ibanga phakathi kwekhala lokuphotha kanye netafula lokusebenza: 50-430 ~ 250-550
Ithebula lomsebenzi: 600 * 500mm ~ 800 * 690mm
Ukunikezwa kwamandla: 380V, 50HZ, 3Phase, noma ngokwezifiso


Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Incazelo Yomkhiqizo

Lesi sikhungo se-CNC Gantry sokubhoboza sinombhede obanzi kakhulu wokubamba ucezu lokusebenza.Idizayini yekholomu ye-Gantry, ukuhlaziywa kwesici esilinganiselwe se-3D esikhanyayo kanye nokwenza kahle komzimba womshini kuletha ukuvimbela umzimba womshini ekuwohlokekeni, ngaleyo ndlela kwandise impilo yesevisi yethuluzi lomshini.

I-castings ye-CNC drilling-tapping center yenziwe ngezinto ezisezingeni eliphezulu futhi yamukelwa ngaphansi kokwelashwa kokuguga, ukuze sithole ukwakheka okuphelele okuzinzile kanye nokuqina okuphezulu.

Umhlahlandlela wama-eksisi amathathu wamukela inkomba yomugqa enembayo ephezulu ukuze uqinisekise ukunemba kokuma komshini ngesivinini esikhulu.

Ukudluliswa kwe-axis emithathu kusebenzisa isikulufu sebhola esinembe kakhulu kanye nokushayela okuqondile kwama-servo motors.

I-shaft eyinhloko ithatha isakhiwo seyunithi ye-shaft enkulu, ukuze ibe nesivinini esikhulu nokunemba okuphezulu.

Iphephabhuku elijwayelekile lethuluzi lesigqoko se-12T lingakwazi ukubona ushintsho lwethuluzi oluzenzakalelayo.

Iwindi lisiza u-opharetha ukucutshungulwa, liwukuvikela kokuphepha kwabasebenza.

Lesi sikhungo sokubhoboza sinesistimu yokulawula ehlakaniphile, opharetha angasetha amapharamitha amaningi njengezinto zokusebenza ezihlukene, futhi kulolu hlelo lokulawula, kunemisebenzi eminingi ongayikhetha.Ngosizo lwesistimu yokulawula, lo mshini ufinyelela ukucubungula okuzenzakalelayo, opharetha bangasebenzisa imishini eminingana.Futhi lo mshini ungasebenzisana namarobhothi ukufeza umugqa owodwa wokukhiqiza othomathikhi.

Ipharamitha

Izinto I-F-BYNC870 I-F-BYNC650 I-F-BYNC6060
Uhambo lwe-XYZ (mm) 700*800*350 600*500*300 600*600*300
Ibanga phakathi kwekhala lokuphotha kanye netafula lokusebenza(mm) 50-500 50-430 250-550
Ububanzi be-Gantry(mm) 750 740 670
Ithebula lomsebenzi (mm) 800*690 600*500 640*700
I-spindle I-BT40 I-BT30 I-BT30
Ukulayishwa kwetafula lokusebenza (KG) 400 300 300
I-Screw pitch 8mm 5mm 5mm
Izinombolo ze-T-slots 5 5 4
I-Spindle motor (KW) 5.5 3.7 3.7
Ama-axis motor amathathu(XYZ) 6/10NM 4/6NM 4/6NM
Imikhombandlela emithathu yama-eksisi (XYZ) (mm) 35*35*35 30*30*30 30
Izikulufu ze-screw rod ezintathu (XYZ)(mm) 32 32 25
Kala(mm) 2.43*2.35*2.56 2.1*2*2.35 1.96*2.01*2.2
Isisindo 5T 3.5T 2.5T
Umagazini wohlobo lwesigqoko soqalo 12T 12T 8T
Uhlelo lwe-CNC I-KND (eyenziwe ngokwezifiso) 

  • Okwedlule:
  • Olandelayo:

  • Shiya umlayezo wakho (igama, i-imeyili, ifoni, imininingwane)

    Imikhiqizo Ehlobene