Manual & auto surface nika inji
Bayanin Samfura
The spindle na M250 manual surface nika inji rungumi dabi'ar P4 matakin daidaici hali, wanda yana da high AMINCI da dace tabbatarwa.
The inji kayan aiki rungumi dabi'ar biyu V manne roba a kwance, daya V daya da kuma daya lebur a tsaye hanya, da ball karfe hanya (dauki gaba daya quenching), wanda yana da high kwanciyar hankali da daidaito, da kuma sauki da kuma m aiki.Abubuwan da za a iya motsi ana shafa su ta hanyar ƙullun mai da aka ja da hannu kuma an sanye su da kayan haɗi daban-daban na musamman don biyan buƙatun niƙa da sauran hadaddun kafa.
M-250YHAS na'ura mai aiki da karfin ruwa atomatik nuni surface nika inji, da workbench for manual motsi a kusa da na'ura mai aiki da karfin ruwa tsarin atomatik tsarin kafin da kuma bayan babban inji bawul ga nika inji ne na musamman bawul, kasu kashi biyu sassa, inji commutation iko, maƙura gudun tsari iko maƙura iko part. da kuma sauke aikin, wanda zai iya gane workbench na rev.Dakatar da wannan bawul yana da aikin daidaitawa na kayan aikin injin yana da sassauƙa kuma mai sauƙin aiki kuma abin dogaro ba tare da daidaiton rawar jiki na kwanciyar hankali na ƙarancin amo da sauƙin kulawa ba.
| Samfura | M250 | M250AH | M250YH | M250YHAS | ||
| Teburin aiki (mm) | 500*250 | 500*250 | 500*230 | 500*250 | ||
| Matsakaicin tafiyar tebur (mm) | 550 | 550 | 550 | 550 | ||
| Matsakaicin balaguron giciye (mm) | 280 | 280 | 250 | 280 | ||
| Nisa tsakanin tebur da Spindle center | 470 | 470 | 470 | 470 | ||
| Matsakaicin nauyin tebur (kg) | 100 | 100 | 300 | 300 | ||
| Ramin Tee (no* nisa) | 14x1 ku | 14x1 ku | 14x1 ku | 14x1 ku | ||
| Gudun tebur (m/min) | Manual | 0-25 | 5-25 | 5-25 | ||
| Keɓaɓɓen keken hannu | 1 daraja | 0.02 | 0.02 | 0.02 | 0.02 | |
| 1 Rev | 2.5 | 2.5 | 2.5 | 2.5 | ||
| Ƙafafun sirdi ta atomatik (mm) | --- | 0.5-12 | 0.5-12 | 0.5-12 | ||
| Ciyarwar giciye mai ƙarfi | 50HZ | --- | 750 | 750 | 750 | |
| 60HZ | --- | 950 | 950 | 950 | ||
| Dabarar niƙa | 200*17*31.75/32 | 200*17*31.75/32 | 180*13*31.75/32 | 200*17*31.75/32 | ||
| Gudun spinle | 50HZ | 2850 | 2850 | 2850 | 2850 | |
| 60HZ | 3420 | 3420 | 3420 | 3420 | ||
| Dabarun hannu a tsaye | 1 daraja | 0.01 | 0.01 | 0.01 | 0.01 | |
| 1 Rev | 1.25 | 1.25 | 1.25 | 1.25 | ||
| Spindle Motor (kw) | 1.5 | 1.5 | 1.5 | 1.5 | ||
| Motar lantarki (kw) | 0.75 | --- | 0.75 | 0.75 | ||
| Motar mai tara kura (kw) | --- | -- | -- | -- | ||
| Motar sanyaya (w) | 40 | 40 | 40 | 40 | ||
| Motar Crossfeed (w) | 60 | 60 | 60 | 60 | ||
| Sararin Sama (mm) | 2500*1500*1800 | 2500*1500*1800 | 2500*1500*1800 | 2500*1500*1800 | ||
| Net nauyi (KG) | 1000 | 1000 | 1000 | 1000 | ||
| Babban nauyi (KG) | 1100 | 1100 | 1100 | 1100 | ||
| Tushen wutan lantarki | 380V, 3 lokaci, 50HZ/60HZ, musamman | |||||
