Saxanka Sare ee CNC Mashiinka Waxshiidka Xarun la'aanta
1. Saldhigga Furimaha la'aanta ah wuxuu ka samaysan yahay bir heer sare ah FC30, oo leh nashqad labajibbaaran oo V-qaabeeya tareen tareen.Hagaajinta wanaagsan ee quudinta kor iyo hoos waxay gaari kartaa 0.001mm.
2. Qalabka dhaymada giraangiraha shiida waxaa lagu hagaajin karaa ± 6 °, iyo isdhexgalka u dhexeeya workpiece iyo giraangiraha hagaajinta waa sax.
3. Buuxi qalabka ikhtiyaariga ah si loo hagaajiyo shaqada hawlgalka iyo ku habboonaanta.
4. Mashiinku wuxuu maray imtixaan adag iyo xakamaynta tayada si loo hubiyo waxqabad aad u fiican.Saxnaanta iyo heerka guuldarada hoose.
| NO | Qaabka | FX-18S | FX-18CNC |
| 1 | Dhexroorka shiida | Φ1-Φ60mm | Φ1-Φ80mm |
| 2 | Cabbirka giraangiraha shiidida (OD*W*ID) | Φ455*205*228.6mm | Φ510*205*254mm |
| 3 | Cabbirka taayirrada hagaha (OD*W*ID) | Φ255*205*111.2mm | Φ305*205*127mm |
| 4 | Xawaaraha giraangiraha shiida | 1520 RPM | 1350 RPM |
| 5 | Xawaaraha taayirrada hagaha | 0 ~ 250RPM | 0 ~ 250RPM |
| 6 | Shidida giraangiraha matoorka | 15HP | 20HP |
| 7 | Matoorka wadista taayirrada hagaha | 3.0KW AC servo motor | |
| 8 | Matoorka bamka saliidda | 2HP | |
| 9 | Matoorka bamka qaboojinta | 1/4 HP | |
| 10 | Taayirrada gacanta quudinta taayirrada hagaha | 3.5mm/R, 0.05mm/cabir | |
| 11 | Taayirrada gacan-ku-wareegga ah ee hagaha | 0.1mm/R, 0.001mm/cabir | |
| 12 | Shaag-gacmeed quudinta miiska lagu shaqayn karo | 9mm/R, 0.1mm/cabir | |
| 13 | Taayir-gacmeed si fiican u rogi kara oo shaqayn karta | 0.2mm/R, 0.001mm/cabir | |
| 14 | Goynta taayirrada gacanta quudinta | 2mm/R, 0.01mm/qiyaas | |
| 15 | xagasha jiirada giraangiraha hagaha | +6°~-5° | +5°~-3° |
| 16 | xagasha wareega giraangiraha hagaha | ±6° | ±5° |
| 17 | Cabirka mishiinada | 2350x1960x1550mm | 2550x2050x1650mm |
| 18 | Cabbirka xirmada | 2900x2400x1850mm | 3050x2500x1250mm |
Mashiinnada
Soo dejinta Qaybaha Mashiinka
