Umshini Wokugaya Ongenawo Isikhungo One-Precision CNC
1. Isisekelo somshini wokugaya okungenamaphakathi sakhiwe ngensimbi ye-FC30 yezinga eliphezulu, enomklamo wesitimela wama-slide ophindwe kabili omise okuka-V.Ukulungiswa okuhle kokuphakelayo kwaphezulu naphansi kungafinyelela ku-0.001mm.
2. Idivayisi yokugqoka isondo lokugaya ingalungiswa ngo-±6 °, futhi isikhombimsebenzisi phakathi kwendawo yokusebenza nesondo lokulungisa sinembile.
3. Qedela okokusebenza ozikhethela ukuthuthukisa umsebenzi wokusebenza kanye nokwenza lula.
4. Imishini iye yahlolwa ngokuqinile nokulawulwa kwekhwalithi ukuze kuqinisekiswe ukusebenza okuhle kakhulu.Ukunemba nezinga lokuhluleka eliphansi.
| NO | Imodeli | I-FX-18S | I-FX-18CNC |
| 1 | Ukugaya ama-diameter | Φ1-Φ60mm | Φ1-Φ80mm |
| 2 | Usayizi wesondo lokugaya ( OD*W*ID) | Φ455*205*228.6mm | Φ510*205*254mm |
| 3 | Usayizi wesondo lomhlahlandlela ( OD*W*ID) | Φ255*205*111.2mm | Φ305*205*127mm |
| 4 | Isivinini sesondo lokugaya | 1520 RPM | 1350 RPM |
| 5 | Ijubane lomhlahlandlela wesondo | 0 ~ 250RPM | 0 ~ 250RPM |
| 6 | Ukugaya isondo lokushayela imoto | 15hp | 20HP |
| 7 | Liqondise isondo lokushayela imoto | I-3.0KW AC servo motor | |
| 8 | I-Oil pump motor | 2HP | |
| 9 | Injini yephampu yokupholisa | 1/4HP | |
| 10 | Isondo lokuqondisa isondo lokuphakela ngesandla | 3.5mm/R, 0.05mm/isikali | |
| 11 | Isondo eliqondisayo elijika kahle | 0.1mm/R, 0.001mm/isikali | |
| 12 | Isondo elisebenzayo lokuphakelayo | 9mm/R, 0.1mm/isikali | |
| 13 | Isondo lesandla elisebenza kahle elijikajikayo | 0.2mm/R, 0.001mm/isikali | |
| 14 | Ukusika isondo lesandla lokuphakelayo | 2mm/R, 0.01mm/isikali | |
| 15 | I-engeli ye-slope yesondo lomhlahlandlela | +6°~-5° | +5°~-3° |
| 16 | I-engeli yokuqondisa isondo | ±6° | ±5° |
| 17 | Usayizi wemishini | 2350x1960x1550mm | 2550x2050x1650mm |
| 18 | Usayizi wephakheji | 2900x2400x1850mm | 3050x2500x1250mm |
Imishini
Ngenisa Izingxenye Zomshini
