Ukupholisha okuzenzakalelayo kwe-CNC kokukhiqizwa kwama-saha blades
Lo mshini uyisisetshenziswa esikhethekile sokugaya i-engeli eseceleni yamablade ayindilinga ayindilinga ebangeni le-carbide.
Idizayini evalwe ngokugcwele futhi enobungani bemvelo, isikhohlisi sibopha ngokuzenzakalelayo isaha, futhi umuntu oyedwa angasebenzisa izingcezu zemishini eyi-10-15.
I-Omron PLC kanye nama-Mitsubishi servo motors asetshenziselwa ukusebenzisa ukuphakelwa okuncane, inani lokuphakela lingasethwa, futhi okokusebenza kunokuqina okuhle.Kusetshenziswa izikulufu zebhola lohlobo lwesiliva kanye namaslayidi aqondile webanga lokunemba.Ukunemba kokugaya kuphezulu futhi ukulahleka kwesondo lokugaya kuphansi.
Isilungiselelo sohlelo siyashintshashintsha futhi siyahlukahluka, futhi indawo yokuphakelayo kanye nesimo sokuhoxa kungakhethwa ngokungafanele ukuze kubonwe izindlela ezihlukene zokugaya.
| NO | Izinto | Ipharamitha |
| 1 | Blade | Φ100-Φ315mm( Φ76-Φ269mm imiklamo ehlukile) |
| 2 | Usayizi we-Arbor | Φ12-Φ50mm (hlela ama-oda atholakalayo) |
| 3 | I-Tooth Pitch | 5-65 mm |
| 4 | I-Engeli yangaphambili | -5°— +30° |
| 5 | I-Radial Angle | -5°— -5° |
| 6 | I-Perigon Angle | 0— 5° |
| 7 | Ububanzi bonqenqema lokugaya | 1.5-13 mm |
| 8 | Ukuqina konqenqema lokugaya | 1.5-4 mm |
| 9 | Ubude bonqenqema lokugaya | 3-12 mm |
| 10 | Ukunemba kokugaya | ≤ 0.02mm |
| 11 | Isivinini sokugaya | 20 PCS amazinyo/ min |
| 12 | Isondo ledayimane | Φ100xΦ20x4mm |
| 13 | Igridi yesondo ledayimane | 220# 280# noma abanye |
| 14 | Umfutho womoya osebenzayo | ≥0.5Mpa |
| 15 | Amandla aphelele | 3.5 KW |
| 16 | Isisindo | 1796 KG |
| 17 | Ubukhulu | 1805x1400x2603 mm |
